粉喷桩单桩承载力确定方法的比较

粉喷桩在高速公路软土地基处理中得到了广泛的应用,但其承载力的合理确定是工程实际中关心的一个重要问题。通过对工程中常用的几种粉喷桩单桩承载力确定方法的比较,分析了各自存在的问题和适用条件,提出了在实际工程应用中确定水泥搅拌桩单桩承载力的选用建议。     

Anisotropic parameter identification using inhomogeneous tensile test

In this contribution, an inverse identification strategy of constitutive laws for elastoplastic behaviour is presented. The proposed inverse algorithm is composed on an appropriate finite element calculation combined with an optimisation procedure. It is applied to identify material anisotropic coefficients using a set up of easy performed laboratory tests. The used experimental data are the plane tensile test and the off axes tensile tests. The identified behaviour models are mainly based on Hill's quadratic yield criterion. Two cases of this yield criterion have been considered: the transverse isotropic and the orthotropic one under an associated and non-associated flow rule assumptions for each case. The yield surface has been assumed to expand isotropically (isotropic strain hardening law) as a function of the plastic work.In order to better describe anisotropic plastic properties of the studied materials, a recently planar anisotropic yield function is used. It is a non-quadratic yield criterion which takes account of anisotropic yield stresses as well as anisotropic strain ratios. It is subsequently shown that the agreement between inverse identification results and experimental measurements were improved.We prove also that the presented strategy is a good alternative to the simplified homogeneous tests assumption, especially for the plane tensile test.     

The Experimental Approach to Effective Stress Law of Coal Mass by Effect of Methane

Effective stress law of all kinds of coal samples, including steam coal, fat coal, corking coal, thin coal and anthracite, under pore pressure of gas, is experimentally studied using a newly developed test machine. These samples are taken from Coal Mines in Wuda, Hebi, Yanzhou, Yangquan, Qingshui, and Gujiao in China. The experiment results show that, under pore pressure of gas, the tested coal samples comply with Biots effective stress law, where the Biots coefficient is not a constant, and is bilinear function of volumetric stress () and pore pressure (p), that is, We define four areas according to the numerical feature of , that is, functionless area of pore pressure, normal function area, fracturing function area, and quasi-soil function area. The effective stress law of coal mass introduced by this paper is a constitutive equation in the study of coupled solid and fluid. This has significance in the drainage and outburst of methane in coal seam.     

Interference effects of two and three super-tall buildings under wind action

Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings have seldom been studied so far due to the huge workload involved in experiments and data processing.In this paper,mean and dynamic force/response interference effects and peak wind pressure interference effects of two and three tall buildings,especially the three-building configuration,are investigated through a series of wind tunnel tests on typical tall building models using high frequency force balance technique and wind pressure measurements.Furthermore,the present paper focuses on the effects of parameters,including breadth ratio and height ratio of the buildings and terrain category,on the interference factors and derives relevant regression results for the interference factors.     

平面八节点四边形理性元

推导平面八节点四边形理性有限元列式，采用具有直到四次多项式的平面问题的微分方程的解作为插值函数，算例结果表明平面八节点四边形理性有限元的有效性。     

常速度拉伸实验惯性效应的实验研究

本文统计了１５０根Ａ３低碳钢比例拉伸试件的断口位置，并测定了常速度拉伸（４００ｍｍ／ｍｉｎ，０．５ｍｍ／ｍｉｎ）时应变随时间和沿杆长的分布以及应力应变关系；发现７２％试件的断口靠近不动端内。同一时刻在设定速度为４００ｍｍ／ｍｉｎ时杆中最大工程应变差１８％．     

排水粉喷桩(2D工法)加固软土地基对桩周土体强度的影响

排水粉喷桩(简称2D工法)作为一种新的软土地基处理方法,在淮盐公路软基处理中得到试用,效果良好;但是目前对其桩间土强度的变化规律还不是很清楚,本文首次通过大量现场试验,采用静力触探、十字板剪切等试验手段,测得了排水粉喷桩施工后桩间土强度变化的规律。结果显示在排水粉喷桩施工后,桩间土强度先降低,之后随着龄期的增长而提高。     

条形平板中裂纹识别的遗传算法

研究条形平板中平行于上下边界的单一裂纹的识别问题。给出了当一声波入射这一条形平板时，裂纹参数与反射、透射系数之间的关系式，并应用遗传算法对裂纹进行了定量识别。计算结果表明本文给出的方法具有较好的识别精度。     

落柱式高压粘度装置的研制与压粘试验结果

作者研制了一台可测试润滑油在高压下的粘度和密度的落柱式高压粘度装置。本装置采用了新型高压粘性动密封和新型高压流变平垫静密封,经1200MPa试压、1000MPa压力下48小时保压和使用试验证明均无泄漏。用本装置所获得的压粘数据的重现性好、灵敏度高、可比性强。